Titebond®

Titebond® 5492 Solvent-Based Subfloor Construction Adhesive, 28 oz, Cartridge, 10 - 20 mins Curing, For Use On: Subfloor Installations, General Plywood Use

289892 MFG #: 5492
$6.79 / EA
In Stock
Titebond® 5492 Solvent-Based Subfloor Construction Adhesive, 28 oz, Cartridge, 10 - 20 mins Curing, For Use On: Subfloor Installations, General Plywood Use
  • Warehouse: BB01, main
  • Spring Overstock Inventory Blowout: Yes
  • Color: Light Tan
  • Container Size: 28 oz
  • Container Type: Cartridge
  • Coverage: 355 ft at 1/8 in bead, 86 ft at 1/4 in bead, 39 ft at 3/8 in bead
  • Curing Time: 10 - 20 mins
  • EOQ: 1
  • For Use On: Subfloor Installations, General Plywood Use, as well as filling gaps and irregularities in the subfloor
  • Hazardous: N
  • Quick Ship: N
  • Shelf Pack: 12
  • Temperature Rating: 0 to 100 deg F Application, -20 F to 120 deg F Service
  • Type: Synthetic Elastomeric Polymer
  • Viscosity Rating: 130000 cPs
  • Voc Content: >350 g/L
Titebond® Solvent-Based Subfloor Construction Adhesive, Synthetic Elastomeric Polymer, 28 oz, Cartridge, 10 - 20 mins Curing, For Use On: Subfloor Installations, General Plywood Use, as well as filling gaps and irregularities in the subfloor, 355 ft at 1/8 in bead, 86 ft at 1/4 in bead, 39 ft at 3/8 in bead Coverage, Light Tan, 0 to 100 deg F Application, -20 F to 120 deg F Service, >350 g/L VOC, 130000 cps Viscosity Rating
  • Item Features 1
  • Item Features 2
  • Item Features 3
  • Item Features 4
  • Item Features 5
  • Item Features 6
  • Item Features 7
  • Item Features 8
  • Item Features 9
  • Item Features 10
  • Item Features 11
  • Item Features 12
  • Item Features 13
  • Item Features 14
Class 1/8 in, type P/O subfloor adhesive in accordance with ASTM D3498-19
Compatible materials: common building materials including wood, engineered lumber, particleboard, osb and wet, frozen and treated lumber
Industry's best subfloor warranty
Solvent-based
Prevents squeaks
Works extremely well in cooler temperatures
Increases floor rigidity
Ideal for plywood, particleboard and osb
Wet & frozen lumber
Fills irregularities between materials to provide a more solid backup surface
PREP: Surfaces must be clean a
CLEANUP: Tools and adhesive ma
LIMITATIONS: Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams, Do not adhere one non-porous material to another as this will slow or prevent drying
APPLICATION: Cut tip straight across for 3/8 to 1/2 in bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association